300ZJ-I-A56 Slurry Pump

Product Detail

The impeller is mounted on the pump casing and is fastened to the pump shaft 3. The pump shaft is directly driven by the motor. The central pump housing has a liquid suction 5 and the suction pipe 4 connected. The liquid through the bottom valve 6 and the suction tube into the pump. Liquid discharge port 8 on the pump casing and the discharge pipe 9.

Before the start of the pump, the pump casing is filled with the liquid. After the start, the impeller is driven by a high speed and the liquid in the blades must rotate along with the rotation. Under the action of centrifugal force, liquid from the impeller center thrown toward the outer edge and get the energy, to speed away from the outer edge of the impeller in the pump shell shaped cochlea. In the case of the spiral case, the liquid is slowed down by the gradual expansion of the flow channel, and the part of the kinetic energy is changed into static pressure energy, and finally, with the higher pressure, the liquid is discharged into the pipe and sent to the need. Liquid from the outer edge of the impeller center flows, in the center of the impeller formed vacuum, due to the pressure on the top of the tank liquid level is greater than the pressure pump at the entrance, the liquid will be continuous pressure into the impeller. Can be seen, as long as the impeller continues to rotate, the liquid will continue to be inhaled and discharged.